My truck has the OEM cruise control and lately it has started to act erratic. When engaged it hunts around(+/- 1 or 2 mph) and makes quick little changes to the throttle-like it's too sensitive. This erratic operation yields a rough ride & makes it unbearable to use.
I've looked around under the hood for cracked vacuum hose or a kinked servo cable to no avail. Today I crawled underneath ('93 350 2wd with Getrag 5 sp) and found the speed transducer-I didn't realize this truck has an electronic speedo! The transducer was loose on the angle drive & there was some oil inside the electrical plug-in. I'm hoping that this might have been my problem but I haven't had a chance to try it yet.
I was wondering if there was a sensitivity adjustment for the cruise control on these machines. Appreciate any advice/recommendations.
Thanks for the help!
Joe Jump
St Louis
I've looked around under the hood for cracked vacuum hose or a kinked servo cable to no avail. Today I crawled underneath ('93 350 2wd with Getrag 5 sp) and found the speed transducer-I didn't realize this truck has an electronic speedo! The transducer was loose on the angle drive & there was some oil inside the electrical plug-in. I'm hoping that this might have been my problem but I haven't had a chance to try it yet.
I was wondering if there was a sensitivity adjustment for the cruise control on these machines. Appreciate any advice/recommendations.
Thanks for the help!
Joe Jump
St Louis