Here I am

Erratic starts, 5.9 2006

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Transmission upshift problem

CP3 and Cam gears with broken tooth

Status
Not open for further replies.

B.G. Smith

TDR MEMBER
When i start the engine, usually after sitting for some time,( a day or two) it will start then immediately die. I have got into the habit of bumping the starter first the starting and that has worked well most of the time. This morning I did the bump started then start and it died after three starts before it came alive. Temperature here has been in sixties and seventies. I checked the lift pump pressure, bump starter and it holds 10#. After the lift pump shuts off the pressure stays at 10# for maybe 20 second the drops to zero. Also holds 10# while running. Any thoughts? Thanks. bg
 
Before you spend the money on a new FCA, unplug it and try starting it tomorrow morning. Don't be alarmed at the knocking when it does start.
 
Status
Not open for further replies.
Back
Top