2nd Gen Non-Engine/Transmission exhaust 4 inch

[Don Blaisdell]

I was wondering if there is anybody out there in TDR land who can advise me if there is anybody in the Rochester, NY area who

installs or repairs 4 inch exhausts, mine is four and ahalf years old and coming apart Thanks in advance Don.

 

[Mundgyver]

Where did you get your exhaust from originally?? Source Automotive has a nice kit that you could install yourself.

 

[SEmerson]

You are probly better off getting a new one. I too would say Source Automotive.

 

[Mad Bomber]

4"

Call Rip!!!!!! http://www.protintnw.com/sa-main.htm

 

[Turbo Tim 1]

Not sure out your way but if you're camping up near Lake George there is a shop in Corinth called B&A Diesel that would put an exhaust on for you. Or if you ordered a system from someone most any exhaust shop would put it on for you. Buy a stainless system and you'll never have to worry about it again. I have a HOG Performance system and I am 100% happy with it.

 

[Mark Craig]

NY Installers!

Blaisdell,



We have some distributors in West Babylon, Port Jefferson, and Orchard Park as well as some distributors in NJ that can do an install for you very easily. I tend to agree with the other posters though you can do an install on one of our systems yourself pretty easily. All the stainelss systems come with 100% welded 304 stainless hangers that use the factory rubber isolaters and that makes installation so very easy. Call me if you need names and addresses in your area.



Mark @ DPPI

 

[americana]

do it yourself and save money. it's easy. definitely give your (or a borrowed) sawzall a workout. took me less than two hours and only needed my neighbor's help for less than five minutes while installing the down tube at the turbo.

 

[BlowinBlackSmoke]

Originally posted by americana

do it yourself and save money. it's easy. definitely give your (or a borrowed) sawzall a workout. took me less than two hours and only needed my neighbor's help for less than five minutes while installing the down tube at the turbo.

thats the way i did it and now i know how its together and that it will stay not like someone else doin it and leaving hangers out or somethin stupid and risk loosing half of it and crushing it with my trailer!

 

[Don Blaisdell]

Hi guys thanks for the info got it all fixed thanks to a buddy who is a real talent with a wire welder , Thanks again for the info Don