exhaust elbo and downpipe wanted

[posey-smoker]

Anyone have an 04. 5 stock exhaust elbo and downpipe thay want to get rid of? I have an 03 that I want to make 4" from the turbo back. Let me know.



Posey Smoker

 

[Tomeygun]

Anyone have an 04. 5 stock exhaust elbo and downpipe thay want to get rid of? I have an 03 that I want to make 4" from the turbo back. Let me know.



Posey Smoker

Direct from my dealers parts dept:



5161570AA - elbow for the 4. 5-05 years $36. 00

52121600AA - 4" downpipe for the 04. 5-05 $65. 00

52121285AA - Clamp for the above $14. 00



OR buy MBRP's downpipe (direct turbo mount, no cast elbow needed) -- about $179

 

[CraigJones]

Are those all the parts I need other then a mufffler to make my 2003 4" all the way out ?

 

[Tomeygun]

Are those all the parts I need other then a mufffler to make my 2003 4" all the way out ?

Not really, That just gets ya to the bend to start towards the rear of the truck... . BUT you can reuse the pipe over the axle, It is 4 inch... So just get a stick of 4 inch pipe, and some hangers and a muffler - And that should be pretty close

 

[SRadke]

Tom, you gunna hang onto your current elbow and pipe after you put the sledpuller in?



-Scott

 

[Tomeygun]

Tom, you gunna hang onto your current elbow and pipe after you put the sledpuller in?



-Scott

I think so, Just in case the stocker needs to go on for some crazy reason, But I do have a few elbows laying around.....

 

[SRadke]

I don't blame you, I kept mine too.