Here I am

Exhaust Mods

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Which fuel additive is best?

P.E. 275 Injectors , TC test results.

Status
Not open for further replies.
Trying to decide wether to go further on exhaust modification on my 99 2500. Added Geno's me kit but thinking 4" all the way as I did on my 94 3500. Comments any one please! Manufacturers or suppliers and reach me by e-mail as well. cdday@mindspring.com
Thanks all

------------------
Denny
 
<font color=blue>Here are the 5 most common names I know with websites :

Why not do the whole exahust? Cool sounds, lower EGT, and quicker turbo spool up. The cost will range from $425 to $800?? (not sure how much the Banks is)

I am sure their are more available, but these are the most commonly used ones, I have a JRE 4" Exhaust on order.

------------------
  • <font color=blue>
  • Eric D. Howard - #ad
    - BOMB'er! - #ad
    - TDR Member since April 8th, 2000
  • 2001 Dodge Ram 2500 HD 4x4 SLT Auto Reg cab Cummins Turbo Diesel 4. 10 gear ratio LT265/75R/16 tires
  • Patriot Blue Pearl Coat, Agate interior, Leather seats EVERY option, Silencer Ring AWOL</font>

[This message has been edited by KatDiesel (edited 07-22-2000). ]
 
Denny, I just put a Jardine 4" exhaust on my truck last week. Sounds good and fit excellent. No problems during installation. Took me and friend 2-1/2 hours to take the old exhaust and install the new exhaust. Topped it off with a Geno's monster tip. Price of the exhaust was $468. 00 shipping included to my door in New York. -Glen

------------------
1998 12 valve 2500 Quad Cab, A/T, 4. 10, Deep Amethyst, 4. 5" Skyjacker Double Flex lift kit, 36. 0"x14. 5"x16. 5" TSL Super Swamper radials on 16. 5"x9. 75" Weld Typhoons, Speedliner spray in liner, Raven high rise cap, J&J stainless steel Nerf-N-Steps, 4" Jardine exhaust
 
Thanks for all your help. Decided to go with complete 4" system. Saw the Banks web site, so know it won't be theirs. Sent e-mail to mfgs suggested, will post out come.
back to work to pay for it!

------------------
Denny
 
Have decided to go with JRE. After reading Kat's problem and how it was resolved, soundsgood to me. Have emailed Ted and will set an appointment on the way back from a Canadian trip. Thanks for everyones input

------------------
Denny
 
Status
Not open for further replies.
Back
Top