2nd Gen Non-Engine/Transmission Exhaust Stack trim circle

[FUL POWER]

I was wondering if anyone could help me find this item. Im putting a 6 inch stack on my pulling truck but i have a cover over the bed. So i need some trim piece that will go around the stack and i can dress up were i cut the hole in the tonneal cover. Thanks

 

[Signal73]

only way I have seen is they sew another piece of tonneau around the cut circle. They put it all the way around the hole to give it some strength and keep it from tearing

 

[Oasis-3]

Cover Holes

This link will show you how I did it. It has held up for 6 years now and still looks good.



http://groups.msn.com/oasis320015/stacks.msnw



Good Luck

Cliff

 

[Bob4x4]

I was wondering if anyone could help me find this item. Im putting a 6 inch stack on my pulling truck but i have a cover over the bed. So i need some trim piece that will go around the stack and i can dress up were i cut the hole in the tonneal cover. Thanks

If it is a fiberglass cover cut a ring out of aluminum,drill and countersink some mounting holes and give it a little polishing.



Bob