F.A.S.S. or other Fuel Delivery System?

[blkdragon]

im shopping around for a high flow fuel delivery system for my truck. the 2003in my signature. i am leaning towards the FASS because a couple of my friends have them on are pulling team and there are no complaints what-so-ever! But am confused on what one to get as far as GPH. they have a 95,150,95/150,150/95 and so on. my goal is to be in the 7-8 hundred hp range in the long run. what pump should i go with. i need to get this done so i can begin modifications without hurting my CP3 or my rail! basically i want a pump that will be fine on my truck now but support my HP goal. is there such a thing?

 

[16919]

I would think at least the 150 system or the 200 gph might be better.

 

[AFarmer]

I would recommend a minimum of a 150/150 system because of the flow and filtration capabilities.

 

[mberry]

Don't rule out the GDP kit also. Just a thought.

 

[Bodie]

700-800 HP



You will need a FASS200. You can run lower pressure for now, and when you get your modded CP3(s), you can put in a different spring and get the higher pressure.

 

[blkdragon]

thaks guys. i think im going to just go with the 200. it is pricy but in this world, you get what you pay for!!

 

[LowFly]

im shopping around for a high flow fuel delivery system for my truck. the 2003 in my signature. i am leaning towards the FASS because a couple of my friends have them on are pulling team and there are no complaints what-so-ever! But am confused on what one to get as far as GPH. they have a 95,150,95/150,150/95 and so on. my goal is to be in the 7-8 hundred hp range in the long run. what pump should i go with. i need to get this done so i can begin modifications without hurting my CP3 or my rail! basically i want a pump that will be fine on my truck now but support my HP goal. is there such a thing?

First off..... what truck is this for? You got an 6BTA, ISB and ISBe all listed in your sig... . this will have a bearing on what pump needs to be run/suggested.



EDIT!!!! IM an idoit! haha... been a long day. OK... ... well i would suggest this then:



FASS 150/90-1008 @ 45 PSI

or

FASS 150/200-1008 & 45 PSI



These are more purpose built pumps for racers and pullers... ... you would never out run either im my opinion... .

 

[JFlagg]

I have a FASS 150 and am completely happy with it, but I also hear alot of guys with the Glacier systems love them too. Haven't compared prices, but that might influence your purchase. Though, there are several dealers on here for FASS, that might help with customer service should you ever have a problem. I know JamesThomas would probably vouch for that.

 

[Luken]

I would put a GDP kit on it. 700-800hp is no problem. The nice thing is, it doesn't matter what power level your at because the walbro will work. Personally after talking to several who have taken the FASS off to run the walbro and a few that want to its a no brainer...