Factory pigtail with Jordan 2020

[TowRig]

Wierd, looks like the power coming from the factory Dodge towing pigtail (2006) is constant and not ignition? Is this correct? When I wired up the Jordan it was on all the time even with the key off which is not correct, any ideas on this?



Factory Brake wiring pigtail 2006 Dodge

Ground: Dark green with black trace

Brake Lights: Light blue with white trace

Trailer Tow Elec brake feed: Light blue

Battery Feed: White wire with red trace



Jordan 2020 brake controller

Ground: White wire

Battery: Red wire

Brakes: Blue wire

 

[klenger]

Sounds correct to me. If the Jordan display is on all the time, then you need to loosen the cable a bit to keep it from activating with no pedal pressure.

 

[jwduke]

I had that problem when I installed mine, you want the cable to be as tight as possible, but not to the point to where it is on all of the time. Good luck!

 

[TowRig]

Sounds correct to me. If the Jordan display is on all the time, then you need to loosen the cable a bit to keep it from activating with no pedal pressure.

Thanks guys, that's exactly what it was, works great now.