FASS Compatability

[lcaad1249]

Would one of the full FASS systems for an 04. 5 Dodge work on a 2001 second gen?

 

[LowFly]

Would one of the full FASS systems for an 04. 5 Dodge work on a 2001 second gen?

The FASS-XXX/XXX-1008 Kits will work. Im pretty sure that the Short Beds kits should work as well... . might have some clearance issues with the shorter bracket... but should be able to work. Make sure there is no intank conversion done to the truck. It will not pull fuel through it!

 

[lcaad1249]

The FASS-XXX/XXX-1008 Kits will work. Im pretty sure that the Short Beds kits should work as well... . might have some clearance issues with the shorter bracket... but should be able to work. Make sure there is no intank conversion done to the truck. It will not pull fuel through it!

Is there any way to tell if it is one of the FASS-XXX/XXX-1008 kits? Does it say on the unit?

 

[LowFly]

Is there any way to tell if it is one of the FASS-XXX/XXX-1008 kits? Does it say on the unit?

As far as the pump, its the same. The only differance would be the parts supplied to make it work with the truck. Saying its an 04. 5, make sure its not an 05 with an in-tank pump. The only real differance would be the wireing harness and Suction Tube Kit.



OR give me a SN and i can run it.

 

[lcaad1249]

It is for sure an 04. 5 without the in-tank pump. I was wanting to go to the higher pressure pump before I get my CP3 modded and a buddy with an '01 was talking about buying it and wanted to know how hard it would be to get to work.

 

[LowFly]

It is for sure an 04. 5 without the in-tank pump. I was wanting to go to the higher pressure pump before I get my CP3 modded and a buddy with an '01 was talking about buying it and wanted to know how hard it would be to get to work.

Same kit... will work just fine then..... just as long as you dont have the intank pump..... and not short bed... . but the bracket can be shortened 3" to make it work.....