fass & fuel press gauge

[Mario210]

I just had a fass installed, and i want to install a f. p. gauge. My problem is they installed a 90* fitting on my cp3. Should i replace that fitting on the cp3 so i can tap directly on the cp3???? also what type of thread is it??

THANX

05 cc sb sw 4x4 E/J/A silverline & mbrp afe fass

 

[Moose]

The FASS auctually has a 1/8 NPT hole on the output ... It has a brass plug in it... On my truck I removed the plug and threaded in a 45* elbow and screwed in the fuel pressure sender... The fuel pressure port in the the fuel tank side of the FASS unit...



Moose

 

[CMNS PWR]

What size is the port?

Mine doesn't have the large brass fitting from their picture. #ad

 

[LowFly]

What size is the port?

Mine doesn't have the large brass fitting from their picture.

#ad




1/8" NPT



I also made a 1/2"x1/2"x1/2" Pipe Tee for my gauge. Used 2, 1/2" MPT to 3/8" barb fittings, and reducer bushings from 1/2" Pipe to 1/8" Pipe. Can mount that anywhere you got line.