fass fuel psi

[blowinsmoke]

I finally installed my fuel psi sender for my commander-most of the time it says 13psi, tapped into the line right before the cp3. I thought that was kinda low for a 150/150. anyone else have some readings

 

[Mobius1]

My reading is 7. 5 psi and that is after a gdp 2 micron filter W/big line kit With the FACTORY pump. That does seem low to me. I would think it would be around 30psi. Checked for kinked or pinched lines.

 

[blowinsmoke]

it still stays 12-13 psi wot with smarty on 9 and powerpuck on 90hp. I did check though and didn't see and kinks, leaks, etc

 

[basilry]

Mine is right before the cp3 also and Im seeing 14 to 16 with the 150/150. It dropps a little with everything on and under full power.

 

[16919]

I think you are fine... thats what mine is around... 14psi.

 

[blowinsmoke]

thanks, I was worried when everyone else was saying high 20's. have yall played with the pressure regulator? I thought about it just to see what happened

 

[speedyjdl]

I hear you can shim them for more psi.

 

[MWiacek]

I have the Fass 95 and it runs at 17 psi at idle and drops to 13-14 under full power