FASS fuel pump 3/8" or 1/2" fuel line What is your choice?

[CRiggan]

I have the 95gph fass w/o filters installed on my 05 ram ( By the way im looking to sell it My ad is on TDR) with 3/8" fuel hose from fass to fuel filter housing.



I am going to replace my 95gph fass with 150gph w/ filters. Should I upgrade to 1/2" fuel hose from tank to fass, fass to fuel filter housing, fuel filter housing to CP3? or stick with my 3/8" hose already installed from the 95 gph fass?





What do you think?

 

[05mxdiesel]

would like some knowledge on this too.

 

[LSteiner]

Line Size

If you look at the hole size in all your fittings you can probable judge

whether larger lines will help. I'm GUESSING 3/8" is just as good

because of the other restrictions.

 

[CEpp]

did u sell it? i cant find it in classifieds

 

[abledog]

I just installed the 150gph system with the 1/2" pickup in the tank. I replaced the 3/8" fittings at the pump with 1/2", this still leaves the 3/8" fitting that screws into the bulkhead fitting on top of the tank as a restriction. If anyone has any ideas i'm open to sugestions!!!

Terry