Attention: TDR Forum Junkies 
D
Deleted member 995608
Guest
I'm sure there's already enough pics of a FASS pump mounted to the frame but here's some more anyway. I have the bed removed because I've had a fuel gauge dilemma that kept giving me false readings so I suspected I was going to need access to the fuel module anyways.
My OE engine mounted pump died miles ago so I already have the in tank module/pump. However, I don't like the draw straw pickup tubes that come with most FASS/ Airdog kits and I certainly didn't want to drill any holes in my tank so I bought one of these http://www.vulcanperformance.com/ProductDetails.asp?ProductCode=FMDS to keep the fuel flow operation somewhat stock.
I'm also fabbing a quick release filter guard from 3/8" plate that will cover the front of the first filter and shield the bottom of both filters from road hazards. Will post pics in this thread when that's finished.
My OE engine mounted pump died miles ago so I already have the in tank module/pump. However, I don't like the draw straw pickup tubes that come with most FASS/ Airdog kits and I certainly didn't want to drill any holes in my tank so I bought one of these http://www.vulcanperformance.com/ProductDetails.asp?ProductCode=FMDS to keep the fuel flow operation somewhat stock.
I'm also fabbing a quick release filter guard from 3/8" plate that will cover the front of the first filter and shield the bottom of both filters from road hazards. Will post pics in this thread when that's finished.
Last edited by a moderator:
