Engine/Transmission (1998.5 - 2002) FASS with Juice Attitude

[DAvaux]

What's the recommended way to hook up the Edge Juice Attitude fuel pressure gauge with the FASS 150/95-1008?

 

[Mark Craig]

DAvaux,



Banjo bolt it in and you'll be OK!



Mark @ DPPI

 

[MBFARMS]

If I understand correctly the FASS system has a place to put the sending unit on the pump. If not there get a tapped tee to place in the line. Check this link out for a general indea on the tee. http://www.vulcanperformance.com/servlet/the-98/Fuel-Pressure-Tee-3-fdsh-8/Detail

 

[DAvaux]

Okay, I used the stock banjo bolt. The new fuel line was bigger but I hose clamped it on and up and running.



Thanks,



Doug

 

[OPoole]

You want a (pressure port) 6" to 8" back from vp-44 in your rubber line. The banjo is old school and you get all the motor's vibration into your high dollar pressure sensor. Also you get a better reading with out all the vibration of the VP-44 I keep these if you need one. Thanks Olee

 

[DAvaux]

That is exactly what I need. How can I get one from you?



Thanks,



Doug

 

[OPoole]

Is on the way thanks olee. . let me know how is turns out!

 

[elandon1201]

You want a (pressure port) 6" to 8" back from vp-44 in your rubber line. The banjo is old school and you get all the motor's vibration into your high dollar pressure sensor. Also you get a better reading with out all the vibration of the VP-44 I keep these if you need one. Thanks Olee

Thats how I did it, works great!!

 

[Silver_Ram]

Olee,



I have a FASS coming for X-Mas, that sure beats keeping the banjo. How do I get one from you... .

 

[OPoole]

Doug

How did it work out for you?

 

[DAvaux]

It worked great. Thanks. Sorry for the delayed response.