Here I am

fin comb ,it works

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Amsoil Diesel Fuel Additive & Stanadne

EZ Question

Status
Not open for further replies.
hey guys,
I found the neatest little tool to straighten your fins on the condenser fins,they can be found at (305)885-1911 that is an HVAC company in Florida called A-1,the thing is a little comb that you rake thru your fins and it straightens them up, ours are 20 per inch but I dont have one this fine I use the 10 per inch and it works great. I have had mine for years,The original company was WATSCO but they sold to A 1 I called them and asked availability she said we got alot ,I didnt ask price but im sure they cant be much,air flow is very important and keepin em straight is a hard job when were always under our hoods bombin or just plain admiring they almighty CUMMINS. #ad
#ad
#ad

Kevin
 
A couple of months ago, I went to half a dozen auto parts stores looking for one of these. Mostly all I got were blank stares. I never thought about an A/C shop, I'll give that a try. Thanks for the tip.

Bob
 
Tim,

Do you happen to have the NAPA part number just in case. I need to clean up my condenser before it gets warm out.

Good info, thanks guys.
 
Look in the phone book for a Air Conditioning supplier, They all will have them. I have a nice set with 15 different combs in it, it only cost about 10 bucks.

Yes they do work great, I have combed out many intinals and so and so loves so and so, out of package unit condensor coils that little punks have violated.
 
Status
Not open for further replies.
Back
Top