First Post !

[osmith]

Hello to all TDR ... this is my first post to the site.



This is a great site I've been lurking for quite a while now and finally decided to join. I've gotten lots of info from here already regarding the KDP and other issues . . so thanks alot.



As you'll see from my signature my cummins is pretty much vanilla (plain) right now. . but I'm looking into a couple of mods. This means that I'll probably post alot of dumb questions

 

[stg2500]

Welcome aboard

 

[JHansen]

Welcome fellow Albertan!

You will find quite a few guys on here from our fair province-at least 10 that I know of..... some close to you-some down in the far South, and some of us inbetween... ...



Anything I can help you with give me a shout!



Jason

 

[Deezul1]

Welcome

I see you already know how to make great decisions, 12valves are awsome.

 

[barbwire]

signatures

OK! Dumb question I'm sure. But, where are the signatures? I see the threads, and the posts, but no sigs. I'm sure I'll get trampled on this subject. And, while I'm at it will someone tell me what WOT is? I'll lay down now, and allow the kicking.

 

[Tardog]

First, Welcome Osmith. Tons of info here, like i've said before. It's like a library that you don't have to bring the books back too!. Barbwire, WOT = Wide Open Throttle. Don't feel bad this is actually one of the acronyms that I know. They should post them all somewhere to help us out. Cheers.

 

[rjones]

Re: signatures

Originally posted by barbwire

OK! Dumb question I'm sure. But, where are the signatures? I see the threads, and the posts, but no sigs. I'm sure I'll get trampled on this subject. And, while I'm at it will someone tell me what WOT is? I'll lay down now, and allow the kicking.

You have to check the small box at the bottom of the page before submtting your post

 

[osmith]

Thanks for the welcome. .



Good to see that there are fellow albertans here. . I never really noticed there were this many.



For the alberta guys, if you've tabbed your KDP how did you do it tab or jig? I tabbed mine but I'm wondering if there's a jig floating around Canada or AB, there's a couple guys I know that would probably like to get ahold of a jig.



I had to tab anyways as my dowel pin was close to 1/4" out fo the hole. This was with 185k km's.



my signature never showed up on my last post. . I hope it does on this one. .

 

[JHansen]

12 valves aren't really my forte-although my brother has a '98 and I have a good buddy with a '94. Gonna work on both of them when the weather gets nice and we get a chance to tab both of them-as I don't believe there is a jig floating around Alberta. I have a buddy up in your part of the world that was just in on tabbing a '98... .



I'm gonna send you a PM here right away too.



Jason