Had to go play "save the broke down Ford" this weekend. :-laf 160 miles one way. Empty 28' gooseneck (4800#'s) got 13. 7 on the way there. Needed fuel so I reset the trip computer. Was an older full size bronco. (4900#'s) On the way back fully loaded got a whopping 8. 9 mpg. Pulling about 10,000 #'s
Truck was just over 2000 miles when I left. With the old 01 I was getting 13 mpg with another 2500#'s on the trailer. This was with 20,000+ miles on the ODO though.
Compared to the 01 2500 quad cab with a BD exhaust and a power Edge Comp box I had been towing with, the 4 door DRW is more stable side to side (expected that) but also rides smoother and does not buck as bad. I was happy with the power but since I was in Iowa and the speed limit is only 65 I could not get into the TQ range and had to downshift on all the hills. The power range seems to be alot higher on this new motor. The sweet spot I think is about 2200-2300 rpm.
Overall, I'm happy with the truck itself. Getting out of a chipped/exhaust truck into a stocker is very difficult.
Not real happy with the mileage numbers but I'm sure that they will increase as I get it broke in. Plus it was only 7 degrees out and I'm burning winter blend fuel.
I need a chip this thing so bad. I can't even get even a little puff of smoke with a full load on it. :{ :{


Compared to the 01 2500 quad cab with a BD exhaust and a power Edge Comp box I had been towing with, the 4 door DRW is more stable side to side (expected that) but also rides smoother and does not buck as bad. I was happy with the power but since I was in Iowa and the speed limit is only 65 I could not get into the TQ range and had to downshift on all the hills. The power range seems to be alot higher on this new motor. The sweet spot I think is about 2200-2300 rpm.
Overall, I'm happy with the truck itself. Getting out of a chipped/exhaust truck into a stocker is very difficult.

I need a chip this thing so bad. I can't even get even a little puff of smoke with a full load on it. :{ :{