2nd Gen Non-Engine/Transmission Flasher that clicks LOUD so I can hear???

[KennethS]

In my 2005 chevy colbalt the turn signal when on makes a loud clicking noise which Is nice. Now do they make a flasher that you can hear.

 

[Thomas]

... Now do they make a flasher that you can hear.

For what vehicle?

 

[TRAMPLINEMAN]

When your wife is in the passenger seat, have her make the clicking noise!!LOL

 

[GFrance]

Hook it up to the seat belt chime.

 

[Murle]

HUH???? What did you say???

 

[HEMI®Dart]

If you can't find one in a local parts store, JC Whitney has them.



http://www.jcwhitney.com/autoparts/...10101/Ntk-AllTextSearchGroup?Ntt=loud flasher





Or 10 of them for $10 on Fleabay (great deal):



http://cgi.ebay.com/ebaymotors/ws/e...tem=4547648763&category=40019&sspagename=WDVW





"It will prevent embarrassment of driving with turn signal on" :-laf

 

[bmoeller]

Any of the electronic flashers I've used, are fairly noisy.

 

[BigPapa]

KennethS,



That is the first part I ever bought for my truck. I don't have a part number but all I did is walk into Auto Zone and asked for a "loud clicking flasher". Seems like it was @ $5.



Scott

 

[Neibe]

My trtuck came with a loud clicking flasher and it also had one to put in for pulling a trailer so all the lights won't overpower the other one. The heavy duty one doesn't make a noise.

 

[DennyDay]

Noisy Flasher

From Radio Shack get a Pizeo (sp) buzzer anywhere from $2. 50 to $10. depending on size/loudness or volume contol. Attach the wires to two of the five treminals. red goes to 12v +terminal that is acvtivated when T/S lever is moved and black to the ground when the lever is moved. I don't have the book at work but will post terminal numbers here tomorrow if you havent figured it out by then.



I spent two weeks looking for a flasher that was loud enough - - never did!



Denny

 

[DennyDay]

Promised wiring diagram

Dodge Turn Signal Flasher



Black Wire from Pizeo Buzzer to top horizontal terminal



Red Wire from Pizeo Buzzer to bottom vertical terminal



If the flasher were a relay, (same terminal layout) the black wire would go to #87 and the red would go to #30





This is to hook up a buzzer to the turn signal flasher.

It will not operate with the four ways.



Denny