Fleetguard Oil filter ?

[446]

I just stopped buy the Cummins dealer to get a few oil filters. He gave me LF3349. Did I get the right one? Ive used fleetguard before but the last oil change the only one handy was a MoPaR filter and I didnt have a ref # for the fleetguard.

------------------
'97 2500 LT 4X4, WHITE,3. 54, AUTO, A/C, 35/12. 5-16. 5 BFG A/T, NO LIFT, K&N, 50K MILES, BOUGHT NEW

'69 SIX PAK B 4SP DANA - SCORCH RED

 

[masterstream]

I don't know what the Fleetguard part number is for the "regular" filter, but the one I run is an LF 3552, which is their premium filter--the one they recommend for their synthetic oil. The guys at Cummins Atlantic say this filter works fine with non-synthetics, just filters better than the standard filter. Cost is $8. 90.

------------------
'97 SLT CC, 4. 10, 4x4, auto, 270 TST all the way forward, 16cm housing, BD converter, Transgo TFOD-HD2, preluber, BFG 295-75s on 16x8 M/T Challengers, Edelbrock shocks.

 

[Missouri Mule]

446,
LF 3349 is the correct number for the standard Fleetguard oil filter.
masterstream is referring to the micro glass filter( will filter smaller particles, came from the generator and pump division).
There is also a Stratapore(spelling?)filter its filtering lies in between the Standard and Micro Glass.
Excuse me! Statapore is listed only for 24 valve engines thought they were for 12 valves too.



------------------
Bill Thomas
Missouri Mule - 96 Wht 4X4 ST CC,5 spd, 3. 54, 8 ft bed, 1 ft high cheater boards.
99 Freightliner bl/wht FL60 ISB-5. 9 24v,215 hp,520 tq,6 spd, 3. 59 nsr,16 ft box, 19. 5 tires,Wt/gvw 11,000/23000

 

[Cooker]

3894 is the part number for the Stratapore filter. Yes it is true this filter was desinged for use on the 24v (stronger case and top portion of the filter) but it can be used on the 12v. I've been running the 3894 on my 12v since I've had the truck (3 oil changes). It's my understanding that the Stratapore is Fleetguard's best filter material. Ryan

 

[446]

thanks guys, oil change time tomorrow. I,m overdue.

 

[Dennis Garrett]

Can't remember the # off hand, but I use the "Stratapore" in my 97, and get them at the Case-IH dealer. They're painted the same color as the engine, & made by Fleetguard. (Hey! it's a tractor engine, shoe horned into a pickup!)

------------------
Locomotive Engineer/Red Ram Driver! 97, 2500, Auto,3:54, 2WD, Re-sale Red, Loaded w/Leather, Diamond Tread running boards & box, Bumper guards, "Bull Ring" tie-downs, Front bumper guards, Clearance lights, TST 230 HP kit (slid forward 1/16"), Missing silencer ring, K&N, Combo exhaust temp & boost gauge, Eng. & Trans. oil temp gauges, 3 Pos. Lock up switch.