Engine/Transmission (1998.5 - 2002) Flywheel bolts????

[Cummins360]

Hi I was just wondering where I could get some heavy duty grade 8 or so flywheel to crank, and pressure plate to flywheel bolts? Also does anyone know where a good place to get a flywheel re-surfaced in the New York long island area is????

Tahnks, Travis

 

[GMincher]

Hey bud, I'd bet the bolts that already in there are grade 8 or better! Have you sheared something off? When I put the South Bend in mine I believe it came with new pressure plate bolts. And on the flywheel question, find a good reputable automotive machine shop. I can't help you as to which shop, I'm a little to far south! See ya, Greg

 

[cruiser_2]

HI there Cummins 360. You can get new bolts for flywheel and pressure plate from Dan at quad 4x4. They are fairly cheap and I beleive they are already grade 10. I put a set in the last time I put my flywheel and clutch setup in.



These bolts are usually good for several clutch replacements if they are torqued properly. Measure them to see if they have in fact stretched. I can't help you with the resurfacing, but Dan at quad has flywheels too.



John