fog lamps

[Archive]

I know I saw an post about wiring your for lamps to run with high beams and low beams help!

 

[Archive]

Dave, open your fuse/relay box under the hood and find the relay for the fog lights. Pull it out and look underneath the relay at the number 5 and number 3 spades. Make up a jumper wire with some #14 wire(about 2 inches long) and put a blue male push on spade on each end. Install the jumper wire where the #3 and #5 spades of the relay fits into the relay board. Put the relay in your glove box as a spare. Thats it! #ad
#ad

 

[Archive]

You can find information in TDR, Issue 29, page 18.

------------------
Fred, 2000 q-cab, 5. 9 cummins, automatic, 3. 54, LSR, 6x9 w/ 6" spots, Century cap, Tafco running boards and mudflaps, Reiker straight-thru muffler, Amsoil/dual filters

 

[Archive]

Chris thanks for your quick reply I am going out and change it right now! I also just put in 80/100 watt bulbs they work great. I will be adding hella driving lights next week, they have a light that will just fit in the slot next to the factory fog lights, Thanks again! Dave

 

[Archive]

Cool!!! I'm gonna try that too. #ad


------------------
'99 2500 ISB QC SLT (No Leather!), 4x4, 5sp, 4:10, 275inj. , PE, PE-EZ, 4"exh. , Pac-Brake, A-Pillar gauge pod w/boost and pyro, Line-X, V-1, lights, siren, lic. plt. frame says "Diesel Fumes Make Me Horny!", and much more goofy stuff.

 

[Archive]

Hey Dave,I asked about it and a member told me how on the boards. Now it was my turn to pass info on to you. This site is GREAT. THANKS to all who have helped ME!!! Chris #ad
#ad
#ad