Ford Center Caps For Dyna-Trac Dodge?

[MTaishoff]

Has anyone tried Center/Hub Caps from a Newer Ford Superduty F250/F350 on their Dyna Trac Kit on Dodge OEM Wheels?



I just drove thru the lot at my local Ford dealer and noticed the Ford Hubcaps already have open centers for the Manual/Automatic Hub; the opening is approx 4 & 1/2", and the OD is about 9"; very similar to my Dodge Wheel; what I don't know is how close the Bolt Pattern is on the Ford vs the Dodge; have heard its metric and then the issue of the long studs on the Dyna-Trac Hubs.



My Dodge Centers won't go on my steel wheels even if I cut out the center portion, because of the long studs. Have not tried them yet on my OEM aluminum/summer wheels.



Sure would be nice if Dyna-Trac offered some custom hubcaps compatable with their Conversion Kit and the OEM Wheels.



Mark

 

[gsbrockman]

what I don't know is how close the Bolt Pattern is on the Ford vs the Dodge

Dodge bolt pattern : 8*6. 50"



Ford bolt pattern : 8*170 mm (about 6. 69")



I kinda doubt they'll work... ...



Greg

 

[mymtnhauler]

Dodge bolt pattern : 8*6. 50"

Ford bolt pattern : 8*170 mm (about 6. 69")

I kinda doubt they'll work... ...

Greg

There are two different alloy wheel sizes for the ford dully , a 16' and a 17' . I have seen some of the 16 inchers on some Dodge 3500's and Chevy 3500's locally. I don't know when they changed to the 17' wheels.
Sorry thought you were looking for the dully center caps!