Ford CrewCab on 12v dodge on TRUCKs

[CToney]

On Trucks on spike they are putting a '7? ford crewcab onto a 12v second gen 3500. Not sure on the exact year. They did the KDP, fuel plate (#10), AFC spring, GSK, and South BEnd Clutch. They should set timing and valves as well. I think things will get a bit toasty for them. They were talking about delivery valves too for another episode. It will be neat to see how it turns out.

 

[JohnsonJim]

I have been following that series... and was excited to see that there was a new episode this past weekend.



The Dodge chassis they are using is a 97 2wd that had been hit in the right front. They ended up having to move the engine back a bit in the chassis, and that in turn is causing interference with the factory Ford heater box. Ford cab is a 79.





The plate that they used was a Bully Dog "stage 4" plate that they slid full forward. They also mentioned that the pump had "been into before" as well.

 

[WDixon27]

i was thinking possible volcanic egt's and smoke like a forest fire but we will see, it is nice to see a 12v get attention on tv

 

[JohnsonJim]

I know it's an old thread... but they still have not progressed from the KDP tab and BD fuel plate episode... too damn many re-runs...