Archived From Boston in Portland OR. 7 p codes. Help!!

[WBacon]

Truck had the cel come on while cruising down the highway. Got into stop and go traffic climbing a steep hill into Portland. Truck started to overheat a bit and then the revs really had to climb in order to get the truck moving up the hill from a stop. Truck is ok now but Im sure something is wrong. codes 0107 0108 0336 (get this all the time) 0480 0513 0643 0868. The truck is an 06 auto 3500 qc dually pulling a 40 aluminun goose neck. GCVW about 23,000. Intake exhaust and TST set at 1/1. 3200 miles from home. Help!

 

[Missouri Mule]

I have some of the codes but not all.

107=Manifold pressure sensor to low.

108=Manifold pressure sensor to high.

336=Cranksshaft position sensor performance.

480=Cooling Fan 1 control circuit/open(low speed fan relay).

513 =?

643=Sensor reference voltage 1 to high. ?

868=?

 

[WBacon]

I know what the codes mean but I do not know what the sum of all these codes mean. Thanks though!

 

[sag2]

P0513 Skim Key, P0868 Governor pressure sensor voltage too high. Sounds like the wires to the fan clutch might be damaged and it shorted out the 5v circuit.