Fron 4x4 hub

[RDBuck]

Will the hub from a 98 2500 4x4 fit on the Dana 60 of a 92. Found a really good deal on two hubs,bearings and rotor for a 98. I need a hub for my 92. Is the hub and rotor the same size? Anything interchangeable? Will pass this deal on to 2nd gens if nothing I can use.

 

[Paul Herioux]

Sorry RD,

The second gens use a unitized hub and bearing assembly which requires a different steering knuckle. Our set up may be a little harder to service but it is a much stronger design.

JM2C,

Paul

 

[RDBuck]

Front hub

Thanks for the quick reply Paul. If anyone is interested there is an ad in my area for sale: "Brand new. Still in box. Left & right side. Fits 1998-2001 Dodge 2500 4WD. Mopar. Lists for $400 each. Will sell both for $250. (Danvers) (cell) 978-815-7404" Danvers is in the greater Boston,Mass. area.

 

[RDBuck]

Front hubs

I tried to edit my last post but it did not work. The two hubs for sale are the 1-pc hub, bearings and rotors.

 

[RDBuck]

New front hub

I may be only talking to myself here but for what it is worth I found a supplier of new hubs for the Dana 60 front axel 4x4. Ventures Truck Part,Equipment, Ogden, Utah- 1-800-464-1713 or 1-801-621-0091 ask for Chris. $200 Has hubs for 3/4,1-ton front and rear. I have installed one and they seem every bit as good as original. You have to buy the hub,rotor and studs as a package from Chrysler for retail of $465.