Front brake flex hoses

[Djfan]

(I searched and flipped pages. Hope this is not too much of a duplicate.)

I'm installing these tomorrow. Dont' see a lot of info on youtube, etc., so I thought I would ask here for tips, etc.

I replaced my Hydro boost but didn't think to replace the flex hoses. The brakes won't release, and I have to open the bleed valves to get them loose. Hope this change works.

Any tips, advice, etc. is welcomed.

Thanks!

 

[BigPapa]

Do them one at a time. Once you've replaced the first one, open the bleeder screw and let it run till you get a good stream of brake fluid. Don't let the MC get too low. Repeat on the other side, then bleed them.