Front Control Arm Bushings

[WOT]

Anyone know if there are Polyurethane bushings available for the front control arms? I don't what to replace the entire control arm, just the bushings.

Thanks


------------------
2000 QuadCab, 4x4, 2500, 6spd, Intense Blue Pearl, No mods as of yet!

 

[HEMI®Dart]

Bob,

Energy Suspension has them for a 2500 '99 4x4. Not sure if yours are different.

They are p/n 5-3120

More info: http://www.energysuspension.com/dgt1.html

I don't know anyone who has just swapped the bushings. Most of us replaced the upper & lower control arms with the much stronger box type that come with poly bushings. The OE rubber bushings look awfully tight in the contol arm. Not sure if a hammer would drive them out. I'll bet you will need to have them pressed out.

[This message has been edited by HEMI®Dart (edited 05-06-2001). ]

 

[WOT]

Thanks...

Did you notice any difference with the new control arms?

Did you have any issues with getting it aligned after you put the new parts on?

Bob

 

[Archive]

I ran Rancho arms with Skyjacker leveling coil springs on my '95 and currently on my '01. 5 I have installed a complete Skyjacker 2. 5" lift. I noticed such a difference on my '95 that I didn't even have my '01 a couple of months before removing the stock suspension.

------------------
2001 RAM H. O. 6Sp 2500 SLT 4x4 Quad Cab, 4Wheel Disc, 4. 10 Limited Slip, Fog Lights, Muffler removed, Silence Ring Gone, Autometer Pro Comp 60# Boost & Pyro, Banks High Ram (Red), Cummins Red Valve Cover, K&N RE-0880, Skyjacker 2. 5 lift Class 2, 7218 Dual steering stabilizers, Custom Pro Fab Trackbar (sweet), EGR Flares (nice fit), Centerline Comet III 16x9. 5 with Goodyear MT/R 315/75R16, Smittybuilt stainless nurf bars, ExTang BlackMax tonno, THIS IS NOT A HOBBY, THIS IS AN ADDICTION !!! MAINLINING DIESEL !!! "I AM GLAD I DID NOT BUY AN AUTOMATIC, JMO"