Here I am

2nd Gen Non-Engine/Transmission Front end shake at highway speeds

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Engine/Transmission (1998.5 - 2002) Torque Converter, transmission flush

2nd Gen Non-Engine/Transmission Marker Light Add-Ons

Status
Not open for further replies.
Since I had my two inch front level spacers installed, I have noticed that at around 60-65 mph that the front end will shake if I go over a not so smooth spot in the road. I have not had the front end aligned since I am planning on putting new tie rods and a trac bar on along with new tires, so I only wanted to make one trip to the alignment shop. I did add longer shocks but it will still do it. Any clue as to what this may be? Maybe because the front end is out of alignment? Thanks
 
Mine did the same thing, except it threw me off the road (i. e. caster wobble or Death Wobble). Try bumping your caster cam bolts to make the bottom control arm longer and get the caster back in spec. I moved mine one 'mark' on each side and it came out pretty close (until I got it aligned).

-JJ
 
Status
Not open for further replies.
Back
Top