Here I am

Front suspension grease zerks

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Ball Joint Replacement

cruise contol seems to have died

Status
Not open for further replies.
Last night I had the grease gun out for the boat trailer and RV trailer wheel bearings... I thought I might as well get the front of the truck done too...



I crawled under the truck and could only find one zerk (on the driver's side where the steering bar connects to the wheel).



All of the other areas with rubber seals had no zerks !!



Last time I greased the front of the truck, I remember more than one zerk ??
 
Last night I had the grease gun out for the boat trailer and RV trailer wheel bearings... I thought I might as well get the front of the truck done too...

I crawled under the truck and could only find one zerk (on the driver's side where the steering bar connects to the wheel).

All of the other areas with rubber seals had no zerks !!

Last time I greased the front of the truck, I remember more than one zerk ??

My 04 has another Zerk on the other end where it connects to the other steering knuckle. Maybe one of yours has broken off.
Bill
 
If you haven't had parts replaced on the front end, you probably will not find zerk fittings as the stock parts do not have zerk fittings. (At least none of my stock parts had them)
 
Status
Not open for further replies.
Back
Top