Fuel hose

[RMcKinney]

High,
Rex McKinney at Madisonville Ky.
I relocated the fuel filler cap(wood Bed) it did not work so now i need longer hoses to correct.
3/4" vent and 1 3/4" filler.
is on line best option?

 

[Joe Mc]

In a pinch, and only temporary, you could try to fine radiator and heater hoses of the close/correct size to get you going. In the meantime look for correctly rated "Fuel" hose.

 

[JR]

Rex check this place out, they have a few options that may work out for you.

https://www.fillernecksupply.com/ga..._9nqqjIUDU0OuQEOkWkb0FHhWAyAIoiwaAkFVEALw_wcB


That is a 3 ft long straight piece, if you need something with a bend on it scroll down on your screen they show sections with a 45 and a 90. The description with the straight section also says they have metal fittings (45's and 90's) if that is something that you would need.

Also, something like this may be a more viable option if you haven't considered it.

https://www.fillernecksupply.com/1-...-inches-long-44mm-gates-24711-goodyear-59201/

Ive never ordered from this website so I have no idea what shipping will be. If it isnt economical another option could be your local parts house... assuming you got a guy behind the counter that doesnt need a VIN to find a part. Good luck!

 

[JR]

So I was just playing with shipping options from the above website I linked, scrap that! They are charging as much for shipping as the dang part.

So I punched in that Gates part number and found it on Rock Auto.

https://www.rockauto.com/en/parts/gates,23968,fuel+filler+hose,6356

That price is per ft so keep that in mind.

You should be able to find most anything you need on Rock Auto or eBay.

 

[Shiner]

Rex check this place out, they have a few options that may work out for you.

https://www.fillernecksupply.com/ga..._9nqqjIUDU0OuQEOkWkb0FHhWAyAIoiwaAkFVEALw_wcB


That is a 3 ft long straight piece, if you need something with a bend on it scroll down on your screen they show sections with a 45 and a 90. The description with the straight section also says they have metal fittings (45's and 90's) if that is something that you would need.

Also, something like this may be a more viable option if you haven't considered it.

https://www.fillernecksupply.com/1-...-inches-long-44mm-gates-24711-goodyear-59201/

Ive never ordered from this website so I have no idea what shipping will be. If it isnt economical another option could be your local parts house... assuming you got a guy behind the counter that doesnt need a VIN to find a part. Good luck!

I ordered a 7' feet? section for my MH a few years back. Don't recall the shipping cost tho. At the time it was cost effective for my need. Maybe I got a code or something.

 

[DavidC]

I also ordered a 10' x 1" hose for my aux. pump from fillerneck. It was the only place I could find online that had diesel rated hose larger than 3/8. I do not remember the shipping and probably did not care as I needed it and they had it.

 

[Shiner]

I also ordered a 10' x 1" hose for my aux. pump from fillerneck. It was the only place I could find online that had diesel rated hose larger than 3/8. I do not remember the shipping and probably did not care as I needed it and they had it.

That was my deal too as I needed 2" diameter. If you gotta have it, $$$ really doesn't matter.

 

[JR]

That fuel line through fillerneck supply would run north of $52 delivered to my door. Manufacturer unknown.

I punched in the part number at RockAuto and can get the same length (3ft) of Gates fuel hose delivered to my door for $36.
I'm not independently wealthy so $16 is $16

They (fillerneck supply) appear to have a good selection, maybe the shipping won't be as much for Rex.

 

[DavidC]

That fuel line through fillerneck supply would run north of $52 delivered to my door. Manufacturer unknown.

I punched in the part number at RockAuto and can get the same length (3ft) of Gates fuel hose delivered to my door for $36.
I'm not independently wealthy so $16 is $16

They (fillerneck supply) appear to have a good selection, maybe the shipping won't be as much for Rex.

I hear ya, every penny counts (sounds like the old days). When I ordered the 1" we were in Minot and the hose on my aux. pump gave up the ghost and I needed it to pump out of my aux. tank. I may have been able to find something locally in Minot ND but prices up there are pretty steep since the oil boom. They haven't realized that is over as the prices have not gone down. There are only 3 RV parks there and the average monthly is $700. They have a flying J that is rediculous on prices. So fillerneck had it and I needed it.

 

[Shiner]

My particular application required the better hose, as it runs within a few inches of rear tag tire with couple of significant bends. I ordered from fillerneck supply due to being able to get exact length vs the extra footage required by rock auto 3 ft increments. I got mine within an inch(too long) in my application. Like I said, I needed 2" and then the vent, I also got, thinking that was 3/4? I do use rock auto quite a bit for other stuff though.

 

[RMcKinney]

Rex check this place out, they have a few options that may work out for you.

https://www.fillernecksupply.com/ga..._9nqqjIUDU0OuQEOkWkb0FHhWAyAIoiwaAkFVEALw_wcB


That is a 3 ft long straight piece, if you need something with a bend on it scroll down on your screen they show sections with a 45 and a 90. The description with the straight section also says they have metal fittings (45's and 90's) if that is something that you would need.

Also, something like this may be a more viable option if you haven't considered it.

https://www.fillernecksupply.com/1-...-inches-long-44mm-gates-24711-goodyear-59201/

Ive never ordered from this website so I have no idea what shipping will be. If it isnt economical another option could be your local parts house... assuming you got a guy behind the counter that doesnt need a VIN to find a part. Good luck!

Thanks,
I just place the order.
I should get about the time it warms up enough to put them on.
Thanks for your time and help. Rex McKinney 1995 2500 stock except home made all wood 8' flat bed.