fuel pressure gauge on 07.5

[hbowers]

I'm putting a fp gauge on a 07.5 can someone tell me where to hook up hose to cp3? it's different from a5.9, help

 

[PFranzese]

I believe its the hose from the fuel filter with the quick disconnect fittings on each end. Its a hard plastic tube, you have to cut and splice in a fitting for the pressure sender. Another option is get a big line kit between the filter and pump that has provisions for a sending unit. The banjo bolt on the pump I believe is the return line.

On my truck I put a banjo adapter in the feed line on the back of the fuel filter since I have 2 micron filtration back at the fuel tank and the filter on the engine is 5 micron. I am sure the filter at the tank would clog first so I feel fairly safe putting the pressure fitting there, probably not ideal but my truck is stock and fuel pressure gauge is mainly for monitoring the filters.

 

[hbowers]

thank you, thats where I thought but wasn't sure. I think you can remove the line w/ the quick disconnect fittings ans put a 3/8 fuel hose in its place w/hose clamps
and splice a tee in. the original hose is only about 3/16 i.d.