Fuel Pressure Gauge

[Archive]

Has anyone mounted a fuel pressure gauge in there trucks and if so where, and who sells them?

------------------
98. 5 2500 QC,SB W/ camper shell, whitw w/driftwood lower 2wd,3. 54, loaded w/o leather,chrome Westin step bars, BD tc/vb w/trans temp,4" BD exhaust from turbo back, firestone airbags, heavy duty pullrite hitch, Bug sheilds, 4x4 type mud flaps front and back, Amsoil bypass & air filter.

 

[Archive]

SPA digital gauges and mounted in the A- pillar. Sweet setup, if you need any help contact me, we sell the spa gauges here in Modesto
B... ... ... ... ... .

 

[Archive]

arar, I mounted mine just below the ash tray, as I already had my brake controller just above and in front of the 4by selector. The addition of fuel pressure guage is as important IMO as pyrometer. With all of the lift pumps failing, knowing when you are starting to have a problem could save the injection pump from a lack of cooling fuel. Good luck.

 

[Archive]

I mounted mine below the dash in a Geno's donut mount. I have info on it and where I bought it through in this message https://www.turbodieselregister.com/ubb//Forum3/HTML/001088.html .



------------------
-Steve St. Laurent - President of the Great Lakes TDR
'98 QC LB (CMNSPWR), 4x4, ISB, 5sp, 4. 10 LSD, TST Powermax, 275hp RV injectors, SW fuel pressure gauge, BD exhaust brake, Isspro turbo temp monitor, front Draw-Tite receiver, rear Draw-Tite class V receiver, BFG 285/75R16 AT KO's, (all the common stuff clipped)

 

[Archive]

One item you should consider is what range/scale gauge you use. My freind used a 0-80 psi. I have a 0-16 psi. I think the 0-16 is the best as you get easier to read and more accurate results. I ordered from Summitt Racing. Mounted under dash in their mounting cup.