Here I am

fuel pressure gauges

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Font brake rotor paint peeling off - normal?

Turbo Silencer Ring

Status
Not open for further replies.
I was thinking of installing fuel pressure gauges on the top of my fuel filter as I have seen in the TDR from time to time. Question is does anyone make a pressure gauge with an electric sender unit so that the gauges could be installed inside the cab without having fuel being pumped inside the truck?

------------------
George, Perry County, PA
99 3500, Reg Cab, 4x4, NV4500, ISB, 4:10,VA box, Intense Blue.
 
George

I believe any quality guage manufacturer offers a fuel pressure guage for inside mounting. Most race sanctioning bodies will not allow fuel to be pumped into the cab for pressure guages and therefore require a fuel pressure isolator. I know that Autometer offer a number of these in different styles to match your taste. Log on to their website and request a catalog to get an idea of what you want. Good luck with the project.

Eric
 
Thanks Eric,
I went to autometers web site and could not find an electric gauge. I'll keep searching.
I have a friend that races street stocks. I'm sure he could point me in the right dirrection.

------------------
George, Perry County, PA
99 3500, Reg Cab, 4x4, NV4500, ISB, 4:10,VA box, Intense Blue.
 
Try Westach. If they don't have what you want they'll make it. That is what they did for my ATF temp gage. They are very helpful. If you want custom face or anything else they will do it. They even painted the gages to match someone's truck.
 
George - check out https://www.turbodieselregister.com/ubb//Forum3/HTML/002205.html . I have pictures of my install as well as parts numbers and a source for Stewart Warner gauges. My set up has dual senders for before and after filter.



------------------
-Steve St. Laurent - President of the Great Lakes TDR
'98 QC LB (CMNSPWR), 4x4, ISB, 5sp, 4. 10 LSD, TST Powermax, 275hp RV injectors, SW fuel pressure gauge, BD exhaust brake, Isspro turbo temp monitor, front Draw-Tite receiver, rear Draw-Tite class V receiver, BFG 285/75R16 AT KO's, (all the common stuff clipped)
 
Great job Steve! Thanks. Man, this is what I love about this group. . If you have a question just ask. Someone has been there, done that!
Now if UPS would just show up with that VA box... ... ...

------------------
George, Perry County, PA
99 3500, Reg Cab, 4x4, NV4500, ISB, 4:10,VA box, Intense Blue.
 
Status
Not open for further replies.
Back
Top