Here I am

Fuel Pressure Sensor P0192 & P0193

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

FASS Non dodge trouble Diesel-Dan

Diff Change Intervals

Status
Not open for further replies.

RWinzen

TDR MEMBER
Yesterday I started my truck and a loud squeal came from under the hood. Ended up being the water pump. No big deal, pretty simple fix. Drive it about 10 miles to let the temps get to normal and make sure I didn't need to add anymore coolant. Stopped for 20mins, got back in cranked right up and drove another mile to the house. Jumped in it today and starts, but lights flash and horn honks like the alarm has been set off and runs very rough. Pulled out the Smarty and I'm getting P0192 each time I try to start it. One time I also got a P0193. I have two '03s that I can switch the Fuel Pressure Sensor with but don't have a deep socket to fit. Does anyone know what size it is?:confused: I'm also open for other suggestions. Thanks, Ron
 
Follow up: It takes a 27mm deep socket and it was the Fuel Pressure Sensor. Horn honk was because my 48RE indicator was not fully in Park (although it would start) and the reverse-drivers-door-open-alert was going off, although it wasn't in reverse either.
 
Status
Not open for further replies.
Back
Top