fuel pressure what gaugeto get? and...

[DJamrose]

what gauge are you guys running in the third gens for fuel pressure. diprocol / autometer do either of them match well? and what is involved in hookoing up i see isolators and braided hoses? do you really need all this thanks

 

[mberry]

Isspro makes a set of guages that match the Dodge OEM look. May not be on their website yet, but they are making them.

 

[p-Bar]

Check with Geno's Garage Great people Isspro all the way

 

[gsbrockman]

I have a few pics here : http://www.kydtr.com/coppermine/thumbnails.php?album=43&page=1



I have the DiPricol in an SRT/10 mount and like it lots. The braided hoses won't be needed; just use a good quality isolator.



Greg

 

[ox1]

Pic counts?

I have a few pics here : http://www.kydtr.com/coppermine/thumbnails.php?album=43&page=1



I have the DiPricol in an SRT/10 mount and like it lots. The braided hoses won't be needed; just use a good quality isolator.



Greg

Hows come the pic of the front of your wife - clear back on the last page - has the highest "hit" count on the whole album? I just don't get it?

 

[gsbrockman]

Hows come the pic of the front of your wife - clear back on the last page - has the highest "hit" count on the whole album? I just don't get it?

I'll take that as a compliment {I think } :-laf :-laf :-laf :-laf

Greg

 

[john3976]

I have the ISSPRO fuel pressure gauge, I had a DiPricol but just did not like having one gauge different then the rest, I also like the lighting on the ISSPRO better.



Both gauges are top of the line and in my opinion you won't go wrong with either one of them.



The DiPricol matches even better than the ISSPRO due to DiPricol putting the little line in the center button where ISSPRO is smooth, both guages match the Dodge gauges very well, people always ask me if the gauges are factory installed.

 

[RDyson]

I have the Isspro. I got it from Diesel Manor. They have everything you need to hook it up--isolator, hose, banjo bolt.

 

[DJamrose]

thanks guys i appreciate the help i will call geno's today pbar how do you like your volant cold air box? noisy like the afe.

 

[p-Bar]

No not too noisy, you can hear the turbo whining. My wife hasn't said anything yet. I think the the volant filter is junk though. I am going to see if volant can retrofit one for me.

 

[Fuzzy Bear]

Autometer Electric Fuel Pressure Gauge

I'm thinking of going with this one Autometer 4360 I have a FASS installed and it has a port for a gauge. Talked to Rip who put it in and he recommends an electric due to the distance from the FASS to the firewall or into the cab. I had a 0-100 electric in my 01 and liked that. I'll probably do that one with a boost gauge in a steering wheel pod. Still have the Bully Dog Outlook but hope to soon have something from Quadzilla.



Doug

 

[Cattletrkr]

I had black faced autometers left over when I sold my 2nd gen so I got the fuel pressure to match those. They're mounted in the triple dash pod from genos. They don't match anything except each other and sit on top of my dash cover. People still ask me if those are factory. :-laf

 

[RJOL]

I've used Westach for my last two CTD's. Worked without any problems for over 5 years. They use a "sender" so you only have wires running into the cab. I mounted both on the VP44 & CP3 injector pump, using a 3' hose extension. Have fun...