Engine/Transmission (1994 - 1998) fule lines

[KHelfrich]

the fule lines keep rusting out on my truck once under waranty and now they are looking pretty bad again and since the truk is apart for a new transmission and paint i was lookinf to replace the lines i really want to go with stainless lines does anyone make the lines in stainless oe what size are the lines that i could just make some new ones



thanks

ken

 

[RT66DOC]

Once you get the new lines in, you could put a permanent end to the problem by moving to Arizona.

 

[TSielski]

Sounds familiar.

The fuel feed line is 3/8" and the return is 5/16".

Only source of stainless tubing I know of is Inline Tube. There are probably others.

www.inlinetube.com

No one I know of makes pre-formed fuel lines in stainless for our trucks, in fact, I was unable to even get OEM (steel tubing) replacement part numbers for the fuel lines for my truck, trying several dealers.

DC recommended I check a junk yard (NOT!)

I made new ones from bulk stainless tubing (from Inline Tube).

Also replaced the feed and return fitting on the fuel module on the tank with a custom machined aluminum widget, as the stocker (steel) was also rusted to the point of failure.



Tim

 

[KHelfrich]

summint racing sells 304 stainless lines alot cheaper 3/16 1/4 5/16 and 3/8



ken