Here I am

Full Center Console Disassambly

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

The First Ram Prototype.

FASS 150 help

Status
Not open for further replies.

BarryG

TDR MEMBER
My new 2017 has the full center console and wondering how to take it apart, a quick look didn't reveal anything obvious. I am just wanting to get access to inside of it for some switches and associated electrical work/wiring, not take it all out or anything. Specifically the section as it comes off the dash where the little cubby hole and sides are. Any tips or guidance would be appreciated.
 
Carefully pop up the trim ring around the large cubby, it just snaps in place. Then remove the screws under the "loose change" container in the front. Once that is out of the way the dash panel around the radio just pops out if I recall. Transfer-Flow had directions on their web site. Not hard at all.
 
Status
Not open for further replies.
Back
Top