FYI, 98-2000 triple & Double Full Piller Gage mounts are now avail from DIS of Texas.

[Archive]

With or Without Tweeters!
Check them out on the Links page, would'nt you know it, I had Just bought double Gage Half Piller from them. #ad
#ad
!

------------------
1998. 5,2500,ISB,Auto,CC,4x4,White Sport,Isspro Boost & Pyro,275hp Injectors,VA,BD Pressure Lock,16x8 Eagles,295 BFG's,2. 5" Skyjacker Lift,Stockland Seibring Shell.
26ft Weekend Warrior.
1973 R/S Z28 Camaro.
1989 Jeep Cherokee.
427ci 585hp L88 Crate Motor, Still in the Crate!.

[This message has been edited by DieselRam (edited 08-05-2000). ]

 

[Archive]

Do not see any link for DIS of Texas. Maybe I just cannot see through all of the smoke.

Thanks to all for the best website on the net.

 

[Archive]

I think this is the link:
http://www.dieselpage.com/apillar.htm

Hope it works.

 

[Archive]

the link works fine. Thanks Bob-TEXAS !

 

[Archive]

Originally posted by DieselRam:
With or Without Tweeters!
Check them out on the Links page, would'nt you know it, I had Just bought double Gage Half Piller from them. #ad
#ad
!

Hey, thanks for the link, but I went to their web site and there were no pictures of the triple mount with tweeters. Has anybody seen / purchased them? I also tried calling but doesnt look like they are open on sat. Anybody know how they attach the tweeter ,does the hole look like the stock hole???

 

[Archive]

The Auto Meter catalog on their web site still does NOT show a part number for a triple A-pillar pod w/ tweeter for 98-up Rams, so I have no idea what DIS is claiming to have for sale. I'll believe it exists when I see it.

I will pass along that I have tried the triple pillar for 87-earlier Rams, but the contour of the pillar is different than the newer Rams and it will not fit worth a damn.

------------------
'99 3500 QC 4x2, AT, 4. 10 LSD, camping/towing pkg. , Mag-Hytec rear cover & trans. pan, Auto Meter gages, K&N air filter, Mopar bed liner & mud flaps, Prime-Loc fuel filter relocation, Tekonsha Sentinel brake controller, Rancho step rails; Air Lift SD air springs

 

[Archive]

Below is what I read on the DIS of texas Front page about the Full "A" Pillar mounts. I dont know whether Order the New Full Pillar mount, Or to just use the half pillar one I have now.
Doug

From the DIS Front Page:
"""""Talked to Greg at Gaugeworks and we are looking at 2-3 weeks away on getting the pillars in stock for the 1998 and up Dodge Cummins (there will be one model for the ones with the tweeter and one for the one w/o the tweeter)

I have the part #'s and the pricing will be the same as the other pillar mounts - we have product on order and are starting to take preorders! Click here to go to the Pillar Mount section"""""""





[This message has been edited by DieselRam (edited 08-05-2000). ]

 

[Archive]

I just got my dual pillar pod from Geno's last week. I'll use Geno's till one of you guys gets this new one and give it a thumbs up.

 

[Archive]

Originally posted by DieselRam:
Heres what I read on the DIS of texas Front page about the Full "A" Pillar mounts. I dont know whether Order the New Full Pillar mount, Or to just use the half pillar one I have now.

"Talked to Greg at Gaugeworks and we are looking at 2-3 weeks away on getting the pillars in stock for the 1998 and up Dodge Cummins (there will be one model for the ones with the tweeter and one for the one w/o the tweeter)

I have the part #'s and the pricing will be the same as the other pillar mounts - we have product on order and are starting to take preorders! Click here to go to the Pillar Mount section"

Doug.

DieselRam, if you recieve the one for tweeters and it passes the thumbs up, then count me in please. - HOV


------------------
1999,2500 (white)4x4,QC,LB,ISB,AUTO,3. 54's Track Loc, All options except leather,Factory Flares(Black),Tow package , Camper package, Rhino Lining(Black), 285/75r16 ,K&N Filter, Waiting to BOMB the heck out of it(I need your inputs first !!!)

 

[Archive]

<font color=teal>HOV -

Give that #15002 by Autometer a look when it comes in I think you will like that much better then the pillar setup. It sits even with the hood as far of line of sight to the road. Mines painted to match my agat interior and well it looks great so keep an open mind about it #ad


If I had pictures of it I would post, I'll try to get some soon but my scanner went kaput.

 

[Archive]

Originally posted by KatDiesel:
<font color=teal>HOV -

Give that #15002 by Autometer a look when it comes in I think you will like that much better then the pillar setup. It sits even with the hood as far of line of sight to the road. Mines painted to match my agat interior and well it looks great so keep an open mind about it #ad


If I had pictures of it I would post, I'll try to get some soon but my scanner went kaput.

Gotchya brother, the dash mount is probably easier to set up also(MINOR) I did get the 4351 changed to a 4357 and it was cheaper to boot! Thanks -HOV

 

[Archive]

It would sure look alot cleaner to have a full pillar instead of the pod I have now. The million dollar question is; does the grain texture on the new pillar match the OE pillar? I'll eventually check one out,but if they're still using the non-matching texture like what's on my pod now,then what's the use.

-Mike

 

[Archive]

Thanks for the heads up DieselRam. #ad
I called Brent at D. I. S. (1-800-658-9355 7:00 AM-5:00 PM Central/M-F) the first thing this morning to place my pre-order on the trick new Gauge Works triple, full A-pillar replacement with tweeter. I was informed by Brent there are four new Gauge Works full A-pillar replacements for the 1998-2001 Rams:
#17202 Dual 2" W/O tweeter
#17203 Triple 2" W/O tweeter
#17204 Dual 2" WITH tweeter
#17205 Triple 2" WITH tweeter
Apparently the #17205 and the #17204 will be released first, both of which have an approximate E. T. A. at D. I. S. in about two to three weeks (by 8-30-00). The four listed A-pillar replacements come black which can be painted to match your interior. Of course, the OE tweeter is transferred over to the Gauge Works replacement. Better hurry up, the line forms to the rear. #ad


drag racer, the reason you did not find the new Gauge Works products on the Auto Meter website is because Brent talks directly to Greg at Gauge Works, thus allowing him to hear the information first. Hopefully Brent will receive a pre-production release of either the #17205 and/or #17204 which he can photograph and place on the D. I. S. website... he is currently working toward that end right now.

Another little D. I. S. news flash: D. I. S. is now an SPS gauge distributor, offering the trick SPA gauges at competitive prices. #ad


www.dieselpage.com/apillar.htm

PS Brent: Thanks for your excellent customer service! #ad
Keep up the good work. #ad


------------------
'98. 5 2500 QC 4x4 Sport, Glasstite Vision II, 285 BFG A/Ts on M/T Challengers, Warn 4X Boards, Mopar fender flares & tow hooks, NW Custom s/s-rubber mud flaps, Mag-Hytec diff. cover & trans. pan, Edelbrock IAS shocks, Reese Titan V hitch, VDO Vision gauges, Dynamat, '00 Sport grille & valve cover, '00 Sport headlights/PIAA Super White bulbs, PIAA Dual Sport 900 aux. lights, BD exh. brake and TorqLoc, Prime-Loc, Bosch 275s, VA CPC, DD Boost Module, Banks Stinger wastegate actuator, ATS exh. man. , Banks 4" dia. s/s exh. sys. , BD V10/Cummins hybrid TC & valve body, BD trans. front pump & PressureLoc, Air Bulldog induction hood (with NACA ducts), plus MANY other trick modifications

[This message has been edited by John (edited 08-07-2000). ]

 

[Archive]

#ad
Back to the top #ad

 

[Archive]

#ad
Back to the top again for member access to the new Gauge Works FULL pillar mount (double and triple gauge, with or without tweeter) part numbers. #ad

 

[Archive]

Did anyone receive and install either the 2 or 3 pod with tweeter yet? Please provide comments if so. Good quality?

Thanks,
Bob

 

[Archive]

There is another thread started for this topic. It also has a link to a finished install of the non-tweeter, plus hopefully a tweeter picture, soon. What a heated topic. The design is very nice. https://www.turbodieselregister.com/ubb//Forum3/HTML/001628.html

Here is a link to a picture, Check it Out For Yourself! http://dis. dieselpage.com/readrig/d24.htm


------------------
CSCPusher
'00 QC,SB,4x4,Auto,3. 54 w/LSD,Trailer Package, Tow Package, SLT Laramie, 265's