gage mount

[Archive]

I'm new to this so here goes.
I have 3 gages mounted on top of my dash in seperate mounts. Somewhere I saw or heard of a 3 gage mounting unit that fits on the right side of the dash unit about even with the gear shift lever. I have searched everywhere I can think of, and no luck. Any help would be greatly appreciated.
91 4X4 5speed 1 ton dually W/flat bed.

------------------

 

[Archive]

Hello downwind: Welcome. Banks is one supplier. They have the 2 or 3 gage mount that fits the 1st gen Dodge nicely on the right hand top.
Have fun

------------------
'92 CUMMINS/DODGE 5SPD, 4WD 16cm2 turbo, mod. pump and injectors, max. flow exhaust, K&N... .
S. T. O. K. E. D. ... . accept no substitutions
www.turbodieselregister.com/memberimages/r0300343.jpg
www.turbodieselregister.com/memberimages/r0300341.jpg

 

[Archive]

Old School,
Do you know if Autometer makes the A pillar mounts for the earlier trucks. I get conflicting stories that they do or don't #ad
.
Does anyone else have some input also?? I would rather have the pillar than dash mount as my tach is already mounted on the right side of the dash. Thanks in advance

------------------
Jason's Lil' Mack - 89 D250LE 2WD 5Spd 3. 55 Reg Cab. K&N,"tweaked pump", 3. 5" Exst straight,E&M Custom seats. Bosch H4, HDI Plasma-white HdLites. Bosch 100W Driving. Bosch 55W Fogs.
210,000 miles

 

[Archive]

Welcome downwind, banks is the only one I know that makes one for the first gen trucks.
Lil'Dog I have a current autometer catalog. They only list a pillar mounts for the 94 and up trucks.
Gene Hayford
92 350 4x4

 

[Archive]

Lil' Dog: I believe Gene's right. I haven't seen a pillar mount for the 1st Gen trucks. Regards

 

[Archive]

OK Lil'Dog, Auto meter does make a pillar mount for 1st. gen trucks. I put one on this week and it looks great. It is not a full pillar piece, But is shaped like and attaches to the existing pillar piece on your truck. I have the box here in my hand and it says black to fit86-93 Dodge. The part number on the bottom of the box is 15198. If you have a problem ordering them call Diesel Injection Service In Lubbock,Texas. That's where i got mine, along with my Isspro gages. (if you order an EGT gage be sure to ger the adjustable probe) I believe there are several companies around the country with the name Diesel Injection Service. Be sure to get the one based in Lubbock. Happy Hunting!

------------------
92 D250 5spd 3. 54 std cab, Banks exhaust,Isspro EGT&Boost gages,16cm Turbo.
67 Dodge R/T
67 Charger
98 Grand Cherokee
97 Stratus
Mopar Only Here
Tulsa 2000 Survivor.

 

[Archive]

Right on!!
Thanks Preeleeguy!! Thats just the ticket. I will call the local speed shop here and get it. Spread this around, I know alot of guys that would rather have the pillar mount.
BTW I was going to get the Banks gauges for the pillar.
Thanks again guys!!! #ad




------------------
Jason's Lil' Mack - 89 D250LE 2WD 5Spd 3. 55 Reg Cab. K&N,"tweaked pump", 3. 5" Exst straight,E&M Custom seats. Bosch H4, HDI Plasma-white HdLites. Bosch 100W Driving. Bosch 55W Fogs.
210,000 miles

 

[Archive]

Thanks preleeguy. Good info for the 1st Team.

 

[Archive]

Your welcome guys. Glad to help!Gages,I feel,are just a mater of preference. They all do the same things. Later.

 

[Archive]

Autometer has an online catalogue@ www.autometer.com
Gauge mounts for 86-93's are available in either single(pn15199)or double(pn15198)gauges. Look in cat. under Autometer/Gaugeworks/Truck.
Have a Rammin Day!!!
Caleb Reese

------------------
1993 LE W250 4x4 CC,Auto,3. 5's,Limited slip. Diamondplate Running boards,toolbox+bedcaps. K+N Filter and gauges on order.
Preparing to B. O. M. B.

 

[Archive]

Guys, I have the 4-hole banks deal that goes on the right side of the dash. 2 pieces, a base that is shaped to the dash, and the 4 hole cover. bought all from Diesel inj. service in TX. I get lots of compliments. Soon I hope to take some pics and post them.

------------------
'92 W250,3. 54,auto,reg cab, raven hi top cap, tach,boost,transtemp,pyro. 16cm housing.

 

[Archive]

I wanted my gauges on the left side of the dash like the later trucks. So I god a set of four from tst I think and did some reshapeing of the bottom half and painted it to match the dash. Works good and looks sharp.

Russ


------------------
93 auto club cab, 124k mi
2wd Banks power pack 16cm Turbo

 

[Archive]

Thanks to everybody for the info. It was just what I needed. downwind

 

[Archive]

Lil'Dog
Did you ever source out a local supplier for the A pillar mount?
Also, does anyone know if there is a way to mount three gauges on the A pillar. I'm looking to add EGT, boost, and tach.
Thanks

------------------
91. 5 D250 5 speed

 

[Archive]

Yo!Preleeguy will autometer single or dual fit truck with pillar handles.

------------------
93'4+4 LE emerald green Banks PowerPack,Cummins crome

 

[Archive]

John, I don't think there would be room for a pillar handle once you mount the gage set to the post. In fact it would be a sqeez to put 3 gages on one pillar, but I understand there may be one available. If your an older guy like me it gets a little hard to read the pillar gages if they are set high on the pillar and you wear bi-focal glasses. Just something to think about. If I had it to do over I'd mount it as low as possible. Later.

------------------
92 D250 5spd 3. 54 std cab, Banks exhaust,Isspro EGT&Boost gages,18cm Turbo.
67 Dodge R/T
67 Charger
98 Grand Cherokee
97 Stratus
Mopar Only Here
Tulsa 2000 Survivor.