Here I am

2nd Gen Non-Engine/Transmission Gauge install help?

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Engine/Transmission (1998.5 - 2002) Malfunction indicator light

2nd Gen Non-Engine/Transmission Brake Pad Recommendations

Status
Not open for further replies.
Alright so I know the basics of the gauge install but I bought mine used and it came with pretty much nothin so does some body have a parts list and instructions for what I need to install a boost fuel pressure and egt I believe with the exception of the pyro they are all mechanical so where do I get the fittings... blah blah I need some help!!! what do you guys got!!!???
 
CM3,



What brand of gauges did you buy? Isspro has a pretty good website to get the parts you need. I would imagine that the parts are universal.



Good luck.
 
GENO'S garage has a hollow bolt to screw in place of one of the intake bolts for the boost. As for the fuel: mine has a banjo fitting on the pump hosed to a diaphragm housing, then it runs straight antifreeze in the small tube through the cab and to the gauge.
 
Status
Not open for further replies.
Back
Top