Attention: TDR Forum Junkies I purchased a nice set of gauges with the A pillar mount. The gauges are ISSPro EGT, Boost, Trans. I have installed the wiring internally and the gauges, but the instruction are for a 5. 9 and everything is different on the 6. 7. Does anyone have nice pics of where to install the pyro probe, boost, and the trans temp sender. I just don't want to screw anything up on this install!
Jason
P. S. I spent quite a while searching around in the 3rd Gen forums and found lots of installation advice, but it was specific to the 5. 9.
Jason
P. S. I spent quite a while searching around in the 3rd Gen forums and found lots of installation advice, but it was specific to the 5. 9.
Last edited:
