Gauge install ????s

[Coalsmoke]

Hey Jim, thanks for trying with the picture. Are the gauge back light colors a close match to the factory OEM ones?

I never knew about the water cooled turbos, but why not, makes sense.

 

[Jim W]

Yes, this is why we choose this brand of gauges. My son's and mine are identical to the factory lighting of the gauges at night.

 

[Coalsmoke]

Ok, thanks very much.

 

[DeezelDood]

Which wire did you tap into for the back lighting on your gauges??



Thanks,

Ed

Go to Home | Dodge Body Builder's Guide

Wiring diagram for 2007 is there. It's a big file (probably 35mb) but worth the download time. The color coding for the 2007 is probably the same as my 2006. 2006 was same as 2005, but pin# was changed. There are two identical wires in the headlight/dimmer harness. Orange with brown tracer. Maybe another 2007 owner can confirm the color. The one that you want is the outlet wire from the dimmer resistor bank. The pins on the switch are are difficult to view or access, so trial and error is the easiest way. 50/50 shot. Needle probe through the insulation and cycle the dimmer. Meter: 2 volts to 12 volts through dimmer range, or use test light.