Gauge Install

[JMichelson]

I am going to install a boost and pyro in my 06. I have looked at the Westech combo gauge because you can get the factory piller to match the original interior with a hole for a single gauge. Does anybody have a two gauge setup that exactly matches the factory interior. I know you can,t have the hand hold with dual gauges, but I would like the color and texture to match the stock piller. What brand of gauges if any, most closely matches the stock instrument cluster? Thanks, Jeff

 

[TRAMPLINEMAN]

I have a three gauge pillar in my '06, all Westach gauges. Top is dual boost/egt, middle is dual temp transmission/rear diff and bottom is fuel pressure. Everything ordered from Genos.

 

[Diesel Dummie]

Sfritts on here has an 03 with the westach pyro/boost and it looks factory with the single pillar pod.

 

[ENafziger]

If you're just wanting to mount two gauges, and need the factory grab handle, your best choice may be the steering column mount with DiPricol Optix gauges.

#ad


#ad


The color and texture both match pretty well, and the column mount gauges are some of the easiest to install.

#ad


#ad


In order to match the factory gauges closer, I should dim the DiPricols slightly more with the included potentiometers, but they actually match a lot closer than what it looks like in the picture.

--Eric
</IMG></IMG></IMG></IMG>

 

[JDecanter]

I have the Isspros and they are a perfect match to the factory gauges. I did the steering column mount for the boost and Pryo. I chose not to paint the mount because there is so much black in the truck and even near the mount that it looks totally stock.