2nd Gen Non-Engine/Transmission Gauge Installation q's

[mike.b]

The search engine doesn't seem to be working so I'm posting these questions.

Gauges I'm installing-

Fuel pressure. Which plug on my fuel filter do I use?

Oil Pressure. I take it I use the 1/4 plug on my oil filter?

Water Temp. Where do I pick up a good reading?

All are EV Isspro Electrical.

Isspro Turbo Temp minder. Any tricks/tips to install this?

Isspro Pyro. Just stopped working. Worked for 3 months. Any ideas?

Thanks!



98. 5 24v SLT Laramie Quad Cab 4x4 One ton LB Dually. VP 44 and lift pump at 110,000. Two starters since 2000. Front diff. oil seal leaking. Currently have 114k.

Thanks!

 

[Black-Smoker]

Sorry the only help that I can give is with the oil pressure and yes the plug in the top of the filter housing will work fine.

 

[JFitzgerald]

About your pryo problem: See my post here about my problem. You may find some other helpful info in this thread too.