2nd Gen Non-Engine/Transmission Gauge reflection on windshield

[John Berger]

I've installed a Westach temperature gauge to monitor my NV4500 temperature. It is a bullet mount on the dash, next to the A Pillar. It reflects off of the windshield and is somewhat annoying. Other than adjusting it downward, which looks bad and is a bit difficult to read, is there anyway to reduce that light glare on the windshield?



TIA



John

 

[Fireman]

can you make a little hood for it ?



Fireman

 

[nickleinonen]

is it the housing that is reflecting during the day, or the gauge light reflecting at night? if it is the light, maybe a colored bulb. . if it is the housing... maybe glue some commando cloth on it. . [commando cloth is used by movie theaters and tv/movie productions... absorbs light real good... buy $$$ey. $10. 00 usd per yard]

 

[Turbo Horseman]

Have you tried window tint. I use it for the high beam and low fuel indicator which seem to bore a bright hole in your retinas on a dark night.



Cut a circle for the gauge and then stick it on. Should eliminate the glare and doesn't cost much. You can probably get a fair sized piece from a windshield dealer for nothing.



Give it a try... keep us apprised.

 

[John Berger]

It's the light reflecting off of the glass during night time driving. No problems during the day. Thanks for the suggestions.