Engine/Transmission (1994 - 1998) Gauge Selection for Truck

[EBottema]

Hey Guys-



Looking to get a set of gauges for my truck that im picking up this weekend! Its obviously a 12v 5spd. . I most likely will go with dipricol gauges becuase they look nice and go with a 3 gauge pod on the a piller... . However, i dont know what gauges to put it in. I want EGT and Boost forsure! Undediced on the 3rd gauge... I dont tow too much, its more of a daily driver and im doing stage 2 afe, 4inch exhaust, 370 injectors... maybe a turbo later



Can you put a underhood liquid filled fuel pressure gauge



Thanks

Erik

 

[McCRam]

I will choose the fuel pressure gauge. Its kinda like an oil pressure gauge for the injection pump. If it can possibly save me the cost of an injection pump, its worth it. I plan on putting the boost and egt on the pillar and the fuel in the dash.

 

[DOUGMartin]

go with a duel pyro/boost and then get both the others.

 

[Hammer]

I have set of white faced gauges from Enterprise Engine Performance in mine and really like them. I only went with 2,EGT and Boost as I feel since I don't tow why add more too wire and look at. Since your asking I'd either add a oil temp,trans temp or a rear end temp(if you add a Mag-Hytec cover) and not waste my time on a fuel pressure for a 12 valve. Us properly valved owners do not have to worry about fuel pressure like the over-valved crowd ... ... ... Andy