Gauge Sensor Install ??

[Archive]

Okay, I know this does not belong in this forum, but no one was answering in the other fourm. So here goes. Do any of you have reccomendations on were to install the boost sensor and EGT sensor?? How about how fuel pressure?? Any one have pics of there installations?? Thanks in advance.

BTW - Gauges will be SPA's and boost/pyro and transmission temp/pressure or fuel pressure and ??? Still deciding what I need.

------------------
01 2500 SLT+ QC LWB 4x4 Auto 3. 54 rear end Forrest Green Sport with all options avail
DC Nerf Bars, DC Grill Gard, DC mud flaps, Line-X bed liner and Leer 160XL Topper
Power Edge on work bench awaiting install. Gauges and 4" Exhaust in planning stages. Dreaming of transmission
up grades and injectors... ... and some type of Airbox mods.
See My Truck
2000 Skidoo Summit 700

 

[Archive]

I posted this on your other thread a couple of days ago, maybe you missed it: See this post https://www.turbodieselregister.com/ubb//Forum3/HTML/001088.html for how I did my sender's for my fuel pressure gauge. If you want your pyro mounted pre-turbo (my recommendation) you can find great info on installing the pyro and boost gauges here http://www.tstproducts.com/gauge_install.html . I'm no help on the transmission temp - I have a stick.



------------------
-Steve St. Laurent - President of the Great Lakes TDR, Chapter Forums Moderator
'98 Quad Cab Long Bed (CMNSPWR), 4x4, ISB, 5sp, 4. 10 LSD, Prime-loc remote fuel filter, boost & pyro gauges, TST Powermax, muffler eliminator, 5" chrome tip, BD Exhaust Brake, Isspro turbo temp monitor, Permatech spray in liner, Grizzly stainless nerf bars, Stull SS grill & bumper inserts, Front Draw-Tite receiver, BFG 285/75R16 AT KO's

 

[Archive]

<font color=purple>JR2... i didnt post in the other forum cause you wanted pictures, i dont have any. I guess its hard to put into words. . Boost: i mounted in back of the intake. . EGT: i drilled and taped a 1/8 27 pipe thread into the exhaust manny, about 1 1/4 in from the turbo flange,Fuel pressure: i mounted mine into one of the test ports located on the top of the fuel filter housing. Those two are 1/8 27 pipe . . ran that to an isolator and then into the cab... hope this helps... post here or e-mail me... . and if ya still need help... u can call me... . JB

------------------
99 Quad,Long bed,4x4, SLT,Auto,K&N,Mobil Super Delvac 1300,fuel line up-grade from lift pump to filter and from filter to injection pump, Suncoast coverter,BD valve body and pressure-loc,Mag-Hytec trans pan,Amsoil ATF-4,Auto meter Ultra lite gauges:Boost,EGT,Fuel Pressure,Trans Temp, "true" Jet-Hot Coated 5 inch exhaust from turbo to tail pipe(over the axle)Borla shoot-out muffler,DD stage 3 injectors and boost module,HX-40 16cm,here and waiting to be installed, Next Jet-hot my ATS exhaust manifold and turbo housing, and special thanx to rob for swaying me on a 4 wire Blue Box(incoming)