gauges

[zues]

I am wondering what gauges match the 2004 OEM gauges. Anybody have any ideas on the X monitor.

 

[GCross]

DiPricol match day and night. I have them but not installed yet.

 

[Bertram65]

Take a look at the Autometer phantom series, I have a couple pics in my reader rig. They are very good quality gauges and good service from Autometer.

 

[Mark Craig]

zues,



The DiPricol's are the closest you'll find. We worked with them for quite a while to get them as close as possible for the 2003+ trucks, even the night lighting in really great.



Mark @ DPPI



By the way I meant to let you folks know that we have a full A Pillar that replaces the factory a pillar, you take yours off and bolt this one on. It is moulded out of the same material from the same supplier as DC and is the factory color too. It holds either 2 or 3 gauges. This way you do not have to cut up you original pillar handle and ruin it, you take it off and put it on the shelf for when you sell the truck! I'll try to attcah a picture, but I am computer challenged so who knows?



Mark @ DPPI

 

[RankRam]

I am wondering what gauges match the 2004 OEM gauges. Anybody have any ideas on the X monitor.

Here is a couple pics of my X-Monitor, I'm very happy with it by the way.



#ad






#ad

 

[231jasonS]

Ill second the X-Moniter. Ive got it and love it, very easy to read. Cant beat the memory and the alarm features and it was very easy to install.

 

[Bertram65]

Mark,

Can you confirm that DiPricol is www.pricol.com ? I have tried to find information on the web about DiPricol and nothing comes up. If it is not, do you have a website for them?

 

[DougJones]

There is some limited information on the DiPricol's on Geno's Garage web page. I've ordered mine from there, with the autometer mounts. Be advised that the trans temp gauge is out of stock.

 

[nwjetboat]

I found these pictures of DiPricol's on Dieselpower Products web site. I like the way they match day/night. .



http://www.dieselpowerproducts.com/gauges

 

[TBrennan]

Wasn't DiPricol supposedly working on a new pyro gauge without the large center hat so it looked more like the other gauges?

 

[JRMora]

I have pictures (day and night) of my DiPricols in mu readers rig gallery. I have been happy with them so far. They match very well in the day light, the pyro is a little different at night. Not bad, but a little different. I don't think you'll find a better match, though.



Juan

 

[Badunit]

The DiPricol EGT gauge matches well in the daylight (other than the large button in the middle) but not so well at night, at least in my experience. The gauge has a green glow and the needle isn't illuminated like the OEM gauges and the other DiPricols from the same series. I wouldn't want it side by side with any another DiPricol gauges at night. Luckily, I have my EGT gauge on the pillar and the others on the steering column.

 

[rbattelle]

GCross,



Which dash pocket mount is that? Looks like the gauges are tilted toward the driver, which is exactly what I've been looking for!!!!

 

[GCross]

GCross,



Which dash pocket mount is that? Looks like the gauges are tilted toward the driver, which is exactly what I've been looking for!!!!

I dont recall the brand name, look on the Genos site under gauges and mounts. They angle left and slightly up. I am anxiously waiting for my installer to have time to put them in. I have seen this setup installed which convinced me to get this. I believe this mount was also in issue 44 of TDR. Cannot be used with electronic tranfer case due to the switch using the dash hole.



-George-

 

[nwjetboat]

Its made by Autometer. Installation instructions are on the web site. I have the electronic shift xfer case, but I may give it a try anyway. I am using the SRT-10 pilar for the transmission temp, so I could get by with 2 gauges.



http://hp. autometer.com/products/mounting_solutions/console_pod_truck/console_pod_truck.html

 

[BHaner]

#ad




#ad

 

[Mark Craig]

Bertram65,



I don't think they have a site, check ours at www.dieselperformanceparts.com and we have pics of them for you.



Mark @ DPPI

 

[rbattelle]

Geno's catalog states that the Autometer console gauge mount only works with Autometer gauges. Can anyone verify that this is true? If so, can the mount be easily modified to accept other manufacturer's gauges?

 

[GCross]

Robin at Genos told me that a slight adjustment to the mounting bracket might be necessary, but it will work with any 2" gauge.



-George-

 

[sheffield442]

http://hp.autometer.com/products/lunar/package_solutions/package_solutions.html

Here is Autometer's new Lunar series gauges I may go with, but like the Diprocal also. The only draw back to autometer is the fuel preasure gauge has 0-100psi reading not quite what i would want still debating but have a couple more monts to decide, will be back in the good old usa in nov. thank god.