Here I am

Getrag PDF File??? Any one have it??

Attention: TDR Forum Junkies
To the point: Click this link and check out the Front Page News story(ies) where we are tracking the introduction of the 2025 Ram HD trucks.

Thanks, TDR Staff

Fuel Screw on 1989 Truck....

Gov spring kit

Status
Not open for further replies.
I tried to email JLEONARD from the facs forumn and the computer tells me the email address is no good. (it may be me, I dont get along well with computers). Anyways could some one send me the PDF file so I can tear into my Getrag with 1/2 a clue of what im getting into and get it all back together.



My email is -- email address removed --

Any help would be greatly appreciated Thanks Caleb:)



Also any idea what bearings seals and synkros is going to cost me???
 
Last edited by a moderator:
My e address is

-- email address removed --

But it sounds like Bill took care of this for me.
 
Last edited by a moderator:
I recived the PDF file. Thanks guys. Any special tools or sockets that I will need? I am a profesional wrench and work at a bus shop so I have full access to the shop after hours to do this. I have a press and bearing splitter as well. Just trying to cover all the bases before I dive into this project. Any other things to watch out for or "dont do what I did" would be helpful as well. Thanks again for all your help Caleb
 
Could I get a copy of that PDF file on the Getrag. -- email address removed --



Thanks



Why Not (Chris)
 
Last edited by a moderator:
HTML:
Jay, what's in the PDF



I believe that it is the Getrag section of the FSM (I don't have that manual so I can't verify). A few years ago another first genner was kind enough to scan that section of the manual into pdf format for me.

Many of us now have that file.

Jay



HTML:
I think he means PFD

To a boater that means personal floatation device. ;) That's my story and I'm sticking to it.
 
Yup, Jay's PDF and the FSM are one and the same. I got the PDF from him about 2mo before I got my manual, and they are identical.



Daniel
 
<a href="http://imageshack.us">#ad
</a>



<a href="http://imageshack.us">#ad
</a>



<a href="http://imageshack.us">#ad
</a>



Michael
 
Last edited by a moderator:
Thanks guys, then I won't bother him for it! ;) Now the PFD on the other hand... . ;)

Can I have that if you're done floating with it? :-laf
 
Status
Not open for further replies.
Back
Top