GM factory centers

[DarkRAM]

Does anyone know if the factory centers for the GM SRW have the same lug pattern and spacing? When I order my 19. 5" from rickson I want to have the lugs exposed, I'll have them PC black. I think it should set of the polished alum. a little more. Any thoughts? Of course I'll lose the bowtie.

 

[Bertram65]

Same bolt pattern, they should fit.

 

[MABurns]

Same bolt pattern, they should fit.

Do they?, H2 wheels fit on GM hums with no issue but yet on the dodge the H2 Hub holes need to be milled 1/8th larger... ... ... .

 

[Bertram65]

The caps are held on by the lug nuts, the bolt pattern is the same, the only difference is the size of the hole in the center of the rim, it should not make any difference to the center cap.

 

[BHolm]

You would need to use the GM lug nuts as well. The cap is held on by the black plastic nuts that screw onto a threaded portion of the actual wheel lug nut.

 

[DarkRAM]

GM lugs

Ok do the lug nuts for the GM studs have the same thread size as the Dodge?

 

[nickleinonen]

Ok do the lug nuts for the GM studs have the same thread size as the Dodge?

nope, they are not. gm uses a 14mmx1. 5 metric thread, and we have a standard 9/16 fine thread...

 

[DarkRAM]

Easy fix?

Ok then, does anyone have any thoughts on an easy fix, I dont want to jack around with it to much, the factory center dont look that bad.

 

[bighammer]

So the Dodge center caps won't work with Rickson wheels?

 

[DarkRAM]

Factory center caps

Bighammer, they work, (check out the customers truck section of Ricksons website) but if I go with the polished alum. then I don’t want a "chrome" center cap. From the looks of it I think the GM center is a closer finish match. If I go with a chrome steel wheel then I might not mind as much. Is it attention to detail or am I just being anal?